Zielinski Shirts: Part 1

Remember how I showed you how to clean a screen last week and promised (I think I may have pinky promised) that I would show the rest of my business card making process later? I lied. For time and other reasons I didn't end up screen printing the cards, but they're still pretty cool. I'll try to do a quick demo on what I did do later in the week.

Anyway, all is not lost on the screen cleaning pursuit. I've been commissioned to screen print some t-shirts for the documentary Zielinski (website here) that's playing at the True/False Film Festival this weekend. I got the design from co-director (and instructor at my college) Chase Thompson today, so the process is about to begin!

Before that happens, please enjoy this trailer:

So, tonight's task was cleaning another screen. This is one I've been putting off for a long time. See, this is the screen I used for my first print and the ink I used turned out to be oil-based. Oil-based ink is okay, but it's a nightmare to clean up. As you might have heard, oil and water don't mix, so in order to clean it you have to use mineral spirits. I've had this screen sitting around with oil-based ink dried on it for months for one reason: I was scared of the mineral spirits. The bottle warns that it is toxic and you should have protection for your skin and very good ventilation. Since I didn't have these things while living in the dorms I left it alone. Now I have latex gloves, a hospital mask, and a bathroom with a vent. Let's get to it!

It's a good look for me!

Since I was gloved up and making a huge mess I wasn't able to get pictures of the scrubbing process, but I assure you, it's not particularly fun. The mask smells like hospital (surprise surprise) and some fumes still get in. I'll just say I'm going to avoid oil-based inks as much as possible.

I got one quick shot during my glove change.

When I finished I waited for the screen to dry while enjoying a delicious frosting and graham cracker snack.

Yum, yum, yum!

Once the screen was dry I spread a nice new coat of emulsion on it. I attempted to get a video of it my headbanding my phone to my forehead, but surprisingly enough, my forehead doesn't see what my eyes see. You'll just have to trust me on this one.

That's it for tonight. I'll be back tomorrow with the burning process and the awesome exposure unit. I double pinky promise this time.

Thanks for reading,

Alie

Let's Clean a Screen!

Finally another post. I won't pretend they're not going to be few and far between for awhile. I'll be finishing up my senior film project for the next month and a half, but after that it'll be craft central!

Fortunately, part of the senior film project is making posters, postcards, business cards, etc so we have a little something to do here. In anticipation of this year's True/False Film Festival this week will be about business cards. For me, making a run of the mill business card wasn't an option. Instead, I will make tiny business card-sized notebooks with my information screen printed on the front. Hopefully people will use it to take notes at the fest and remember me. Maybe they'll even want to hire me! (fingers crossed)

Earlier today I got a couple transparencies printed at Kinkos so I can burn my screen tomorrow. I didn't have any screens free, so I needed to clean one.

The process started with a screen I'd burned previously, a bottle of photo emulsion remover, a scrub brush (mine is shaped like a potato), and a bathtub. If you have a tub with a sprayer use it.

The first thing to do when cleaning a screen is to get any ink off. If there is any ink left on the screen it will likely become permanent.

Next, get the screen completely wet on both sides. If you don't have a sprayer just splash it until it's totally wet. Then pour a nice even layer of emulsion remover on the screen. Scrub it around a little with your brush (a toothbrush will work, but it'll take longer). Then let it sit there for about 30 seconds or so.

At this point you'll turn the screen on its side and scrub it. This is the first time I'd used this particular remover and it is awesome! Lightning fast! Scrub it until no more ink comes out. If you need to, rinse the screen and put a little more remover on then scrub again!

My screen after one scrub down.

Once you have all the emulsion off, spray the screen with your sprayer. If you don't have one use the hardest spray you can get your hands on (garden hose sprayer in the summer, in the winter you might put a bathing suit and shower shoes on and use your shower, but be careful! I've never done that!). You should end up with a nice looking screen like this!

Be sure to hold your screen up to the light to make sure everything is gone. The gold ink on the screen in this picture is just stain from the last time I used it. As long as nothing is blocking the holes it'll be okay. In the end I had a beautiful screen ready to be put back to use tomorrow!

Ta da! Note: My remover is Chemical Consultant Inc. ER/35. If you have a different kind make sure you check for specific instructions. This is the process I've used for all other removers I've used, but I can't guarantee there aren't some out there that are different. You can also use diluted bleach, but it takes awhile. My bottle was $15 and it's definitely worth it!

I promise I'll be back tomorrow or Tuesday with the next step of my business card process. Pinky swear.

Thanks for reading,

Alie